When you look for a shell jacket for your team, you soon run into figures and standards: 10,000 mm, 4/4, class 3, EN 17353. They are worth understanding, because they decide whether your team stays dry and whether you, as an employer, meet the rules on personal protective equipment. In this article we explain in plain English what the labels mean and which jacket suits which job.
Waterproof or water-repellent: the first difference
A water-repellent jacket has a finish (DWR) that makes droplets bead up and roll off. That is fine for a short shower. A waterproof shell jacket also has a membrane or coating and taped seams, so no water gets in, even during prolonged rain. Only the latter really deserves the name shell jacket.
Hydrostatic head and breathability: what do the figures mean?
The hydrostatic head (in mm) shows how much water pressure the fabric can take before water seeps through. As a rule of thumb:
- 5,000 mm: handles ordinary rain well
- 10,000 mm: waterproof in heavy and prolonged rain
- 15,000 mm and above: for tough conditions, including when pressure is put on the fabric (a backpack, kneeling, sitting)
Breathability (in g/m²/24h) tells you how much moisture can escape from inside to outside. The higher the figure, the less you sweat under the jacket. For active work, aim for 8,000 g/m²/24h or more. For example, the Stormtech Scirocco reaches 10,000 mm and 10,000 g/m²/24h, and the Stormtech Nostromo as much as 15,000 mm.
EN 343: the standard for workplace rainwear
Work rainwear is tested to EN 343. On the label you will see two or three values:
- First figure: water penetration resistance, from class 1 to 4. Class 4 is the highest.
- Second figure: breathability, also from class 1 to 4. The higher, the more comfortable during physical work.
- Third mark: rain tower test on the complete jacket. An X means this test was not carried out.
The Tricorp Techshell, for example, scores 4/4, putting it in the highest class for both water resistance and breathability. The Helly Hansen UC-ME achieves 3/3.
EN ISO 20471: high visibility for roadside work
EN ISO 20471 is the standard for high-visibility clothing in high-risk situations, such as working on or next to public roads. There are three classes, depending on the area of fluorescent and reflective material. Class 3 is the highest and is often required for work alongside motorways or in the dark. The Helly Hansen UC-ME Hi Vis Shell Jacket is an example of a class 3 jacket.
EN 17353: enhanced visibility for medium risk
EN 17353 is a newer standard for medium-risk situations where EN ISO 20471 is more than you need. Think of cycle couriers, maintenance teams, schools, parking attendants or people who work outdoors in the evening. The standard has three types:
- Type A: reflective material only, for visibility in the dark
- Type B: fluorescent material only, for visibility in daylight
- Type AB: a combination of both, for day and night
The advantage: an EN 17353 jacket looks less like a hi-vis vest and can also be worn away from the work site. The Projob Progression Shell Jacket 7414 is one such jacket.
Which shell jacket for which job?
- Office, sales, corporate gift: no standard needed, choose style and a good hydrostatic head (Berkeley Avery, Stormtech Scirocco).
- Technical services, logistics, outdoor work without traffic risk: a work rain jacket certified to EN 343 (Tricorp Techshell).
- Medium-risk work, often at dusk or in the dark: EN 17353 (Projob 7414).
- Working on or next to public roads: EN ISO 20471, often class 3 (Helly Hansen UC-ME).
Not sure which standard applies to your team? Check your risk assessment or ask your health and safety adviser. We will then gladly help you choose the right model.
A logo on a certified shell jacket: is that possible?
Yes, with some care. With EN 343 you do not want to damage the membrane, so we usually choose a low-temperature transfer rather than embroidery. With EN ISO 20471 and EN 17353, the logo must not cover so much of the fluorescent and reflective areas that the minimum area required by the standard is no longer met. That is why the logo goes on the chest, the sleeve or the dark part of the jacket.
How Maximum Image helps you choose the right shell jacket
We translate the standards into a concrete proposal for your team.
- Advice on the right standard and class for each role
- A selection from brands such as Tricorp, Helly Hansen, Projob, Stormtech and Berkeley
- Printing and embroidery in our own workshop, without putting the certification at risk
- Declarations of conformity on request for your health and safety records
- A quote within 24 hours
See our selection on the printed shell jackets page, read our overview of 6 shell jackets to personalise or get in touch.
Frequently asked questions
Is a 10,000 mm hydrostatic head waterproof enough for work?
For most outdoor jobs, yes, provided the seams are taped. If you work in the rain for hours or put pressure on the fabric, choose 15,000 mm or EN 343 class 4.
Can I wear an EN 17353 jacket instead of an EN ISO 20471 jacket?
Not if your risk assessment requires high visibility, for example for work alongside motorways. EN 17353 is intended for medium risks and does not replace EN ISO 20471.
How long does a hi-vis jacket remain compliant?
Manufacturers specify a maximum number of washes. For the Helly Hansen UC-ME, that is 20 washes. After that, visibility is no longer guaranteed.